Related to SpinetiX ARYA  ENTERPRISE
 
This article shows how to set up a SpinetiX iBX440 player for a LED Wall. 

A few important things to remember when setting up a LED wall configuration in SpinetiX ARYA:
  • All outputs must be set to the same orientation
  • All outputs must be set to the same Video Mode (1080p or 4k)
  • LED wall is one continuous display (no gaps) with one width and one height
  • The mapping of outputs to screens is pre-determined (see below)
 
The process is easy and only takes a few minutes. Let's get started. 

What you will need:

  • an iBX440 player and its power supply
  • 2-4 HDMI Cables
  • a LED Wall composed of 2-4 sections with individual inputs for each section
  • a SpinetiX ARYA Enterprise and a DSOS System license on your iBX440 or a SpinetiX ARYA SYSTEMS account.

Steps:

    1. Unbox the player and connect the HDMI cables on the 4 HDMI outputs on the front of the player.



      Select from one of the supported arrangements listed below. The diagrams show which outputs of the iBX440 will drive which screen of your LED wall.

      For this tutorial, we assume this will be done through one or several LED controller(s). This means that the outputs of the iBX440 will be the inputs in your LED controller(s) and the outputs of your LED controller will end up driving the screens of your LED.

       

      2x2 Arrangements

      2x2.png

      1x4 Arrangements

      1x4.png

       

      4x1 Arrangements

      4x1.png



      1x3 Arrangements
      1x3.png

       

      3x1 Arrangements

      3x1.png




      1x2 Arrangements

      1x2.png
       

      2x1 Arrangements

      2x1.png

    2. Next, attach one end of your Ethernet cable to your iBX440 player and the other - to a network switch connected to the internet.



    3. Connect the power cable to your iBX440 and plug the other end to a power outlet.



      The power LED indicator on the iBX440 should light up red, and you should hear a beep indicating that the player is booting up.



    4. Turn your display on. After the player is done booting up, you should see a message reading “Welcome” on the screen connected to HDMI 1 of the iBX440.




    5. On the browser of your PC, go to https://arya.spinetix.cloud/setup and sign-in to your SpinetiX ARYA Account. 

      spinetix-arya-login-screen.png


    6. Once logged in, from the main menu, click on “PLAYERS” and then "Setup".

      Main_Menu_player_section_selectd.png
       
    7. From the Players-Setup screen, you will see all connected players to your account (if any). Click on the “Add Player” button on the top right.

      add-new-player-to-spinetix-arya-account.png
       
    8. Enter the serial number displayed on the screen connected  in the space provided by SpinetiX ARYA, then click "Next". 
    9. The display connected to your iBX440 will now show a 4-digit PIN. Enter that number in the space provided by SpinetiX ARYA then click NEXT.
       
       
    10. Give your player a name, for example “Lobby”, and select the player's timezone, then click “NEXT”.




    11. For the Application: select LED then click Next.



       
    12. Choose the number of screens that you have in your LED wall, the orientation and Video Mode of your outputs, then click “Next”. In this tutorial, we have selected 3 screens, horizontal orientation and 4K for the Video Mode. 



    13. Select the appropriate screen arrangement for your setup. In this tutorial we have selected the 1x3 arrangement. 



    14. Next, adjust your output resolutions to match the individual screens of your LED wall. In this example we are setting up a 11'352 x 2'048 video wall: 
       
      Output resolutions LED 3.png


      Important
      Horizontal arrangements require all outputs have the same height
      Vertical arrangements require all outputs have the same width
      2x2 arrangements require all columns have the same width and all rows have the same height
      You must set your LED controller's outputs to match what is set in the Player Setup Wizard 

      By setting the resolutions of the individual outputs, SpinetiX ARYA will define which portions of each output to use (output's effective area) and create a custom canvas type for you to create content for your LED wall. This canvas will automatically map which portions of the content to send to which output of the iBX440. 

      You can find this canvas in the CREATE - Video Wall Section of the platform.


      LED Visualisation.png

    15. Finally, name the canvas that you will use to create content for your new video wall and click Finish.

      Name Video Wall.png

      • This is how easy it is to setup your iBX440 player for a LED wall and set it up with SpinetiX ARYA, so that you can start scheduling and publishing content on display.




 

Comments

0 comments

Please sign in to leave a comment.

Was this article helpful?

2 out of 2 found this helpful